Nu-Blade™ Print E-mail

Analysis

ANALYSIS

Guaranteed Analysis
2.50% — Total Nitrogen (N)
......Ammoniacal — 1.35 %
......Nitrate — 0.40 %
......Urea — 0.75 %
5.00% — Available Phosphoric Acid (P2O5)
2.50% — Soluble Potash (K20)
0.12% — Chelated Magnesium (Mg)
0.15% — Combined Sulphur (S)
0.05% — Boron (B)
0.05% — Chelated Copper (Cu)
0.50% — Chelated Iron (Fe)
0.25% — Chelated Manganese (Mn)
0.05% — Chelated Zinc (Zn)

Derived From:
Urea, Ammonium Phosphate, Potassium Phosphate, Potassium Nitrate, Boric Acid, Magnesium, Iron, Copper, Manganese, and Zinc Glucoheptonates, Proprietary Plant Extracts, Microbial Extracts, Amino and Organic Acids, Natural Vitamins and Sea Plants.
1 U.S. Gallon Net Weight 10.6 lbs / 3.78 Liters Net Weight 4.82 Kg / pH: 3.5

Key Benefits

KEY BENEFITS

Nu-Blade™ is designed to accelerate new growth and is the solution for new seeding, over seeding, sod installation, hydro seeding, and transplanting
True Foliar:
Nutra Green™ is designed to be foliar applied and completely foliar absorbed while it is drying on the target plant.

A unique extract designed to accelerate growth and development of seedlings. When applied on the seed, growth of the root and shoots are increased significantly in the first 10 days.

For germinating seeds, accelerated growth establishes a larger root mass, and provides a shoot that is able to penetrate the soil surface faster, have a larger leaf surface and initiate a higher photosynthesis rate.

Often means the difference between a good or successful turfgrass and could eliminate reseeding under poor soil conditions.

Nu-Blade™ has been scientifically tested on many turfgrasses. The increase in root mass helps increase nutrient uptake and improve drought resistance of the plant.

Nu-Blade regulates the growth both at the germination stage and later stages. In addition to the accelerated growth response, treated seeds may be more resistant to disease, because of natural elicitors found in Nu-Blade™.

Application Guide

APPLICATION GUIDE

Add Grigg Brothers Ultraplex™ to any Grigg Brothers foliar application at the rate of 3 fl.oz per 1,000 FT²
Ultraplex™ contains micronutrients, biostimulants, and a non-ionic organic surfactant which decrease drop size and enhances wetting of the entire surface area of the plant.

NEW GROW IN/OVERSEED - WEEKLY
COOL and WARM SEASON TURFGRASSES:
Week 1 - prior to germination 12 fl oz of Nu-Blade™
Week 2 - 4 fl oz Nu-Blade per 1000 Ft².
Week 3 - 4 fl oz Nu-Blade per 1000 Ft².

Next 3 weeks weekly applications of:
6 fl oz Gary's Green™ 18-3-4+micros per 1000 per 1000 Ft².
6 fl oz P-K Plus™ 3-21-18+micros per 1000 Ft².
Follow up with seasonal formulation.

HYDRO SEEDING
4 Gallons per acre.

SOD
4 Gallons per acre plus water in.

TRANSPLANTING
Mix 2 fl oz of Nu-Blade™ per gallon of water that is used for transplanting.

MSDS

MATERIAL SAFETY DATA SHEET
Issued on & Current as of 02/07/2008 (supersedes all previous versions)


SECTION 1
COMPANY IDENTIFICATION
Manufactured for Turfgrass Management, Inc. D.B.A.,
Grigg Brothers, PO BOX 128, Albion, Idaho, 83311
08:00–17:00 MST, Mon-Fri: 1.800.246.8873
EMERGENCY NUMBER: After hours, holiday’s, and all other non business hours; call poison control
1.800.222.1222

PRODUCT IDENTIFICATION
GRIGG BROTHERS ID #: 730
COMMON NAME: Nu-Blade™
CHEMICAL DESCRIPTION: Nitrogen, Potassium, Phosphate, plant extracts, and compounds listed below
CHEMICAL ACTIVITY: N 2.5%, P 5%, K 2.5%, B 0.05%, Mg 0.5%, Cu 0.05%, Fe 0.5%, Mn 0.25%, Zn 0.05%



SECTION 2 - HAZARDOUS INGREDIENTS/ IDENTITY INFORMATION
INGREDIENTS / HAZARDOUS COMPONENTS: (Specific Chemical Identity; OSHA PEL ACGIH TLV C.A.S. NO. SARA Common Name) (Mg/M3) (Mg/M3) %
Ammonium Phosphate # 7783280



SECTION 3 - PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING POINT: > H2O
SPECIFIC GRAVITY: (H2O=1) 1.19
VAPOR PRESSURE: (MM HG) N/A
VAPOR DENSITY: (AIR=1) N/A
MELTING POINT: N/A
EVAPORATION RATE: < H2O
pH: 3.5
(BUTYL ACETATE=1) N/A
APPEARANCE AND ODOR:
Light green; Slight odor



SECTION 4 - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (METHOD): FLAMMABLE
LIMITS: LEL N/A UEL N/A EXTINGUISHING MEDIA: Water
SPECIAL FIREFIGHTING PROCEDURES: N/A
UNUSUAL FIRE & EXPLOSION HAZARDS: N/A



SECTION 5 - REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: N/A INCOMPATIBILITY (MATERIALS TO AVOID): N/A
HAZARD DECOMPOSITION OR BY-PRODUCTS: N/A
HAZARD POLYMERIZATION: May Not Occur
CONDITIONS TO AVOID: N/A



SECTION 6 - HEALTH HAZARD DATA
PRODUCT: Nu-Blade™
TOXICITY: None Found
ROUTES (S) OF ENTRY: [Skin] [Ingestion]
CARCINOGENICITY: NTP: No
IARC Mongraphs: No
OSHA Regulated: No
HEALTH HAZARDS (ACUTE & CHRONIC) / SIGNS & SYMPTOMS OF EXPOSURE:
This product may cause eye and skin irritation (See Emergency and First Aid Procedures).
EMERGENCY AND FIRST AID PROCEDURES:
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Call a Physician. Skin: Wash contaminated areas with plenty of water for 15 minutes. Remove contaminated clothing and footwear and wash clothing before reuse. If skin Irritation continues consult a physician. Ingestion: Do not give anything by mouth to an unconscious person. If swallowed do not induce vomiting, give one or two glasses of milk or water. Contact physician immediately.



SECTION 7 - PRECAUTION FOR SAFE HANDLING AND USE
FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Absorb liquid spills with a dry absorbent, containerize usable material for disposal in an approved waste facility. WASTE DISPOSAL METHOD: Dispose in closed containers, at an approved landfill, in accordance with local, state and federal regulations. Material may also be flushed with water to a wastewater treatment system.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in enclosed containers.
OTHER PRECAUTIONS: Avoid ingestion, contact with eyes, skin and clothing.



SECTION 8 - CONTROL MEASURES
RESPIRATORY PROTECTION: NIOSH/MSHA approved for mists. Use with adequate ventilation and employ respiratory protection when exposure to mist and spray is possible.
VENTILATION: N/A (Have adequate ventilation)
PROTECTIVE GLOVES: Impervious gloves.
EYE PROTECTION: Side shield safety glasses or goggles.
OTHER PROTECTIVE CLOTHING AND EQUIPMENT: Protective clothing to minimize skin contact should be worn. Wear chemically resistant safety shoes. Wash contaminated clothing with soap and water and dry before reuse. Safety showers and eye wash facilities should be provided in all areas in which this product is handled.
WORK/HYGIENIC PRACTICES: Good housekeeping procedures should be followed to minimize exposure.



ALTHOUGH THE INFORMATION AND RECOMMENDATIONS SET FORTH HEREIN (HERE IN AFTER "INFORMATION") ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE CORRECT AS OF THE DATE HEREOF, GRIGG BROTHERS MAKES NO REPRESENTATIONS AS TO THE COMPLETENESS OR ACCURACY THEREOF. INFORMATION IS SUPPLIED UPON THE CONDITION THAT THE PERSONS RECEIVING SAME WILL MAKE THEIR OWN DETERMINATION AS TO ITS SUITABILITY FOR THEIR PURPOSES PRIOR TO USE.
IN NO EVENT WILL GRIGG BROTHERS OR ANY OF IT’S AGENTS BE RESPONSIBLE FOR DAMAGES OF ANY NATURE WHATSOEVER RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HERE UNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.

Attachments


Attachments:
 DATA[Catalog Page for Nu-Blade™]42 Kb
 LABEL[Label for Nu-Blade™]156 Kb
 MSDS[MSDS for Nu-Blade™]43 Kb
 
gemstarr
orionag
space
TOP